Search results for "BEST procedure"

Determining Soil Hydraulic Properties Using Infiltrometer Techniques: An Assessment of Temporal Variability in a Long-Term Experiment under Minimum- …

2020

Conservation agriculture is increasingly accepted by farmers, but the modeling studies on agro-environmental processes that characterize these agricultural systems require accurate information on the temporal variability of the soil&rsquo

Testing infiltration run effects on the estimated water transmission properties of a sandy-loam soil

2016

Abstract Testing factors influencing determination of soil water transmission properties by an infiltrometer method helps better interpretation of the collected data and allows the development of appropriate sampling strategies for the intended use of the data. These factors include the soil water content at the start of the experiment, the height from which water is poured onto the soil surface, and the duration of the infiltration run. A sandy-loam soil was sampled with the BEST (Beerkan Estimation of Soil Transfer parameters) procedure of soil hydraulic characterization and two heights of pouring of water (0.03 and 1.5 m) under three different initial soil water content, θ i (0.12 ≤ θ i …

Testing the BEST procedure to estimate the soil water retention curve

2012

The BEST (Beerkan Estimation of Soil Transfer parameters) procedure is attractive for simple soil hydraulic characterization but there is the need to test the reliability of the predictions. In this investigation, the BEST procedure to predict water retention of 199 Sicilian soils was evaluated. The BEST water retention model performed well (relative error, Er≤0.05) for approximately 80% of the soil samples. Low errors were obtained in soils with a high clay, cl, content (≥44%), whereas both high and low Er values were obtained in soils with a lower cl content. The BEST particle size distribution (PSD) model was accurate for 50% of the samples and the fitting accuracy increased with cl, wit…

Soil hydraulic properties determined by infiltration experiments and different heights of water pouring

2014

Abstract Establishing the dependence of the soil hydraulic characterization carried out by an infiltration experiment on the procedure used to apply water on the confined soil surface may help to better interpret the collected data and also to develop more accurate strategies for soil hydraulic characterization. Soil was sampled at four Sicilian sites with both the Simplified Falling Head (SFH) technique and the Beerkan Estimation of Soil Transfer parameters (BEST) procedure and two heights of water application (0.03 and 1.5 m). The most appropriate BEST algorithm to analyze the data was determined and the effect of the height of water pouring on the measured soil hydraulic properties was e…

Testing different approaches to characterize Burundian soils by the best procedure

2011

Abstract The Beerkan Estimation of Soil Transfer parameters (BEST) procedure seems attractive for soil hydraulic characterization but it has received little testing so far. The objective of this investigation was to test BEST with different application approaches for some soils in Burundi, where there is the need of using simple methods to characterize soils. Most (14) of the 19 sampled sites had a clay soil texture whereas texture ranged from silty clay to loam in the other cases. On average, the fitting ability of both the particle size distribution (PSD) model (mean relative error, Me ( E r ) = 2.0%) and the cumulative infiltration model ( Me ( E r ) = 2.3%) was good according to recomme…

INVESTIGATIONS ON INFILTRATION METHODS FOR AN IMPROVED SOIL HYDRAULIC CHARACTERIZATION

2020

Use of BEST Procedure to Assess Soil Physical Quality in the Baratz Lake Catchment (Sardinia, Italy)

2016

Conversion of Mediterranean maquis and/or natural forest into agro-pastoral lands is a cause of soil degradation in many Mediterranean areas. Indicators of soil physical quality (SPQ) quantitatively linked to soil hydraulic properties are a valuable tool to assess the effect of land use changes. In this investigation, the Beerkan Estimation of Soil Transfer parameters (BEST) procedure for soil hydraulic characterization was used to estimate SPQ indicators. Four areas of the Baratz Lake watershed, Sardinia, Italy, characterized by both typical natural vegetation (holm oak [ Quercus ilex L.] forest and high maquis) and degraded vegetation (grassland established after fire or clearing of the m…

Testing an adapted beerkan infiltration run for a hydrologically relevant soil hydraulic characterization

2020

Abstract Literature raises doubts about the usability of infiltrometer methods to characterize soils in a hydrological perspective since these methods often yield excessively high infiltration rates or saturated soil hydraulic conductivity, Ks, values. For a loam (AR) and a silty-clay (RO) soil, beerkan infiltration runs were adapted in the perspective to obtain usable soil data to predict rainfall partition into infiltration and rainfall excess. In particular, the initially nearly dry soil was sampled with different water volumes (15 or 30) and heights of water application (low, L, 0.03 m, and high, H, 1.5 m), and the BEST-steady algorithm was applied to determine sorptivity, S, and Ks. Th…

Using Beerkan experiments to estimate hydraulic conductivity of a crusted loamy soil in a Mediterranean vineyard

2019

Abstract In bare soils of semi-arid areas, surface crusting is a rather common phenomenon due to the impact of raindrops. Water infiltration measurements under ponding conditions are becoming largely applied techniques for an approximate characterization of crusted soils. In this study, the impact of crusting on soil hydraulic conductivity was assessed in a Mediterranean vineyard (western Sicily, Italy) under conventional tillage. The BEST (Beerkan Estimation of Soil Transfer parameters) algorithm was applied to the infiltration data to obtain the hydraulic conductivity of crusted and uncrusted soils. Soil hydraulic conductivity was found to vary during the year and also spatially (i.e., ro…

A simple field method to measure the hydrodynamic properties of soil surface crust

2013

The hydraulic resistance of the surface crust was determined by a combination of two infiltrometric techniques: first, a surface measurement of steady-state infiltration rate is conducted by a mini-disk tension infiltrometer (MDI); then, the surface crust is removed, its thickness is measured, and a ponded infiltration test is performed at the same site. The Beerkan Estimation of Soil Transfer parameters (BEST) method is applied to estimate the hydraulic properties of the underlying soil provided the particlesize distribution and the bulk density are known. Under the assumption of a unit gradient of hydraulic head below the soil crust, the pressure head at the interface crust-soil is derive…